[Free] 2018(Mar) EnsurePass Passguide VMware VCP510PSE Dumps with VCE and PDF Download 101-110

Ensurepass.com : Ensure you pass the IT Exams 2018 Mar VMware Official New Released VCP510PSE
100% Free Download! 100% Pass Guaranteed!

VMware Certified Professional on vSphere 5

Question No: 101 – (Topic 3)

Click the Exhibit button.

Ensurepass 2018 PDF and VCE

For the selected item, what two properties could the storage administrator use to create a zone? (Choose two.)


B. vmhba1.C0.T0.L1

C. fc.2000001b321314a7.2100001b321314a7


Answer: A,D Explanation:

Fibre channel adapter and target needs to be used to create a zone.

Question No: 102 – (Topic 3)

A new LUN has been provisioned to all hosts in a vSphere5.x cluster. On one host a new VMFS datastore has been created.

How will the new datastore be discovered by the other ESXi 5.x hosts?

  1. A rescan of all host bus adapters is periodically performed by ESXi hosts to detect new VMFS datastores.

  2. New VMFSvolumes are automatically added to members of a cluster by vCenter 5.

  3. A manual refresh is required on each ESXi 5.x hosts to discover new VMFS datastores.

  4. A refresh of all host bus adapters is periodically performed by ESXi hosts to detect new VMFSdatastores.

Answer: C Explanation:

You need to manually refresh every ESXi 5.x host to get it to discover newly added VMFS datastores.

Question No: 103 – (Topic 3)

The storage administrator has recommended testing the performance benefits of jumbo frames and enabled jumbo frames on the storage array. The VMware administrator has enabled jumbo frames on the VMkernel port used for the software iSCSI initiator.

What other two components must be modified to enable jumbo frames support for the software iSCSI initiator?(Choose two.)

  1. The physical switch

  2. The port group

  3. The software initiator

  4. The virtual switch

Answer: A,D

Reference:http://www.interworks.com/blogs/kculwell/2010/01/29/enabling-jumbo-frames- vmware-esx-4

Question No: 104 – (Topic 3)

What is the default VFAT scratch partition size for ESXi 5.x when installed on a USB drive?

  1. 600MB

  2. 544MB

  3. 4GB

  4. none

Answer: D

Reference:http://blogs.vmware.com/vsphere/2011/09/booting-esxi-off-usbsd.html(see bulleted # 3)

Question No: 105 – (Topic 3)

What is one requirement when adding an extent to a VMFS datastore?

  1. A new unused NFS mount

  2. An RDM with sufficient space available

  3. An unused iSCSI or FCP LUN

  4. Free space on the LUN holding the VMFS datastore

Answer: C Reference:http://kb.vmware.com/selfservice/microsites/search.do?language=en_USamp;cmd= displayKCamp;externalId=1017662

Question No: 106 – (Topic 3)

How can you verify that vStorage APIs for Array Integration (VAAI) functionality is enabled for a storage array in a vSphere 5.x implementation?

  1. VAAI will be reported on the Hard Disk properties page for any VMDK stored on a compliant array

  2. Hardware Acceleration will be reported on the Hard Disk properties page for any VMDK stored ona compliant array

  3. Supported will be listed in the VAAI column for any datastore created on a compliant array

  4. Supported will be listed in the Hardware Acceleration column for any datastore created on a compliant array

Answer: D

Reference:http://www.vmware.com/files/pdf/techpaper/VMware-vSphere-Storage-API- Array-Integration.pdf

Question No: 107 – (Topic 3)

When designing a storage infrastructure to support ESXi 5.x hosts what limit will be reached first?

  1. Maximum number of NFS datastores

  2. Maximum number of iSCSI LUNs

  3. Maximum number of paths to an iSCSI RDM

  4. Maximum number of iSCSI paths on a host

Answer: C Explanation:

When the storageinfrastructure is designed to support ESXi 5 hosts, the number of path to an iSCSI RDM are reaches its limit first.

Question No: 108 – (Topic 3)

Which is the most secure method of connecting to an iSCSI storage array using an independent hardware iSCSI adapter?

  1. One-way CHAP

  2. Mutual CHAP

  3. Per-target CHAP

  4. Per-subnet CHAP

Answer: A Explanation:

If you’re thinking two direction CHAP authentication would be the most secure, you would probably be right EXCEPT the question was about an independent hardware iSCSIadapter. As per the VMware pubs page: “Independent hardware iSCSI supports CHAP only at the initiator level.” which means One-way CHAP.

Question No: 109 – (Topic 3)

Which are the correct parameters to specify when adding an iSCSI target to an ESXi 5.x host using the Static Discovery tab?

  1. iSCSI server ip address, port 902

  2. iSCSI server ip address, port 3260

  3. iSCSI server ip address, port 902, iSCSI target name

  4. iSCSI server ip address, port 3260, iSCSI target name

Answer: D Reference:http://kb.vmware.com/selfservice/microsites/search.do?language=en_USamp;cmd= displayKCamp;externalId=1008083

Question No: 110 – (Topic 3)

An administrator decides to implement a Fixed multipathing policy for an ESXi 5.x host with four available paths to one VMFS datastore. After the policy has been enabled for the datastore, how many paths will have an active status by default?

  1. 4

  2. 3

  3. 1

  4. 2

Answer: A Explanation:

When the policy has been enabled for the datastore, 4 paths will have active status by default.

100% Ensurepass Free Download!
Download Free Demo:VCP510PSE Demo PDF
100% Ensurepass Free Guaranteed!
Download 2018 EnsurePass VCP510PSE Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *