[Free] 2018(June) Dumps4cert Cisco 300-160 Dumps with VCE and PDF Download 231-240

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 May Cisco Official New Released 300-160
100% Free Download! 100% Pass Guaranteed!

Designing Cisco Data Center Unified Computing

Question No: 231 – (Topic 2)

Which is a feature of the Data Center Core layer?

  1. The core layer provides the high-speed packet switching backplane for all flows going in and out of the data center.

  2. The core layer provides the high-speed packet switching backplane for all flows going out of the data center.

  3. The core layer is purely a Layer 2 environment. As a result, the core layer is not free of spanning tree and vPC.

  4. The core layer provides connectivity to multiple aggregation modules and provides a resilient Layer 3 routed fabric with a single point of failure.

Answer: A

Question No: 232 – (Topic 2)

Refer to the exhibit.

Dumps4Cert 2018 PDF and VCE

Which four options are Cisco best practices that should be included or implemented in the design for resiliency, deterministic behavior, and fast convergence in case of link failures? (Choose four.)

  1. Add additional OSPF adjacency between N7K-1 and N7K-2 via dedicated Layer 3 link.

  2. Configure vPC peer-gateway in the vPC domain between N7K-1 and N7K-2.

  3. Use point-to-point OSPF adjacencies.

  4. Place the primary FHRP role on N7K-1.

  5. Configure Layer 3 port channels between all N7K devices.

  6. N7K-3 and N7K-4 must be the OSPF designated routers.

  7. Place the primary FHRP role on N7K-2.

  8. All OSPF adjacencies should be between loopback interfaces.

Answer: A,B,C,G

Question No: 233 – (Topic 2)

Which tool is a part of the Cisco ACE product family and is a critical component for cloud computing architectures?

  1. Cisco ANM

  2. Flexible NetFlow

  3. Cisco Prime LMS

  4. Cisco Prime DCNM for LAN

Answer: A

Question No: 234 – (Topic 2)

Which protocol is required in order for FabricPath to support switches or hosts that dual- attach through classical Ethernet?

  1. VDC

  2. vPC

  3. LISP

  4. OTV

  5. VSS

  6. TRILL

Answer: B

Question No: 235 – (Topic 2)

Which two characteristics are associated with the core layer of a Data Center Unified

Fabric network? (Choose two.)

  1. no packet manipulation

  2. QoS-policing

  3. voice, data, and wireless convergence

  4. scalable routing protocols like OSPF

  5. Layer 2 default gateway redundancy

  6. QoS-classification and queuing

Answer: A,D

Question No: 236 – (Topic 2)

Which three options are critical benefits of deploying Cisco FabricPath architecture? (Choose three.)

  1. Layer 2 scalability

  2. conversational learning

  3. improved spanning-tree performance

  4. equal-cost multipath forwarding

  5. flexible hardware support

  6. broadcast storm suppression

Answer: A,B,D

Question No: 237 – (Topic 2)

Which tool is used to manage NX-OS devices and features like vDC and vPC?

  1. Cisco ANM

  2. Flexible NetFlow

  3. Cisco Prime LMS

  4. Cisco Prime DCNM for LAN

  5. Cisco Prime DCNM for SAN

  6. Cisco VNMC

Answer: D

Question No: 238 – (Topic 2)

You use Dynamic ARP Inspection on data center switches Which two options can the switches use to perform ARP validation? (Choose two )

A.

syslog

B.

a 802.1x user authentication database

C.

access control lists configured on each switch port

D.

astatic ARP access list

E.

a DHCP binding database

Answer: C,E Reference:http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/releas e/12-

2_55_se/configuration/guide/scg_2960/swdynarp.html#pgfId-1039854

Question No: 239 – (Topic 2)

Which of the following is true with respect to Cisco Adapter FEX?

  1. Cisco Adapter FEX extends the Cisco FEX technology into a traditional rack servers MoR design.

  2. An EoR design is not permitted with Cisco Adapter FEX.

  3. Cisco Adapter FEX extends VDCs across multiple Cisco Nexus switches.

  4. A ToR design is not permitted with Cisco Adapter FEX.

Answer: A

Question No: 240 – (Topic 2)

Which action must occur before an N Port can exchange data with other N Ports?

A.

The N Port must log in to its target F Port.

B.

The N Port must log in to its attached F Port.

C.

The F Port must log in to its target N Port.

D.

The F Port must log in to its attached F Port.

Answer: D

100% Dumps4cert Free Download!
Download Free Demo:300-160 Demo PDF
100% Dumps4cert Pass Guaranteed!
300-160 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *