[Free] 2018(Apr) EnsurePass Braindumps Cisco 210-065 Dumps with VCE and PDF 61-70

Ensurepass.com : Ensure you pass the IT Exams
2018 Apr Cisco Official New Released 210-065
100% Free Download! 100% Pass Guaranteed!

Implementing Cisco Video Network Devices v1.0

Question No: 61 – (Topic 3)

When a user attempts to sign in with a Jabber Video for Cisco TelePresence client, which SIP message is the first that is sent?

  1. INFO

  2. NOTIFY

  3. REGISTER

  4. SUBSCRIBE

Answer: D

Question No: 62 – (Topic 3)

Which two methods can you use to update the configuration automatically using the persistent configuration settings for an endpoint using TMS? (Choose two.)

  1. Manually refresh the endpoint configuration for the Cisco TMS provisioning page.

  2. Cisco TMS can be scheduled to push a template to endpoints.

  3. User can edit the configuration manually for the endpoint from Cisco TMS.

  4. The endpoint can receive the persistent settings from Cisco TMS after each reboot.

  5. The endpoint can download the configuration via DHCP option 150.

Answer: B,D

Question No: 63 – (Topic 3)

Refer to the exhibit.

Ensurepass 2018 PDF and VCE

The screenshots show outputs from the xStatus of a Cisco TelePresence endpoint and the VCS registrations. What are the protocol and direction of the call, the called party, and the transmit rate of the call?

A. h.323, incoming, 5919*2345, 1152 Kb/s B. h.323, outgoing, 5919*2345, 1152 Kb/s C. h.323, incoming, 5919*2345, 768 Kb/s

  1. sip, incoming, 5919*2345, 768 Kb/s

  2. sip, outgoing, 5919*2345, 768 Kb/s

Answer: B

Question No: 64 – (Topic 3)

Refer to the exhibit.

Ensurepass 2018 PDF and VCE

Which option enables you to create a system snapshot?

  1. Status

  2. System

  3. Configuration

  4. Applications

  5. Users

  6. Maintenance

Answer: F

Question No: 65 – (Topic 3)

A technician has installed and powered on a Cisco TelePresence MCU 5320 and is connected via the console port. The technician needs to determine the IP settings that were automatically assigned via DHCP. Which command should be entered?

  1. xstatus

  2. show network eth0

  3. status

  4. help static

Answer: C

Question No: 66 – (Topic 3)

Your customer has an EX60 at a home-office that is doing direct H.323 dialing. When they place calls to remote sites, they report that they cannot see video or hear audio from the remote sites. What is most likely the cause of this issue?

  1. NAT mode is not configured on the EX60.

  2. The HDMI cable that connects the EX60 to the monitor is not plugged in.

  3. A username and password must be configured on the EX60.

  4. QoS is not properly configured on the EX60.

Answer: A

Question No: 67 – (Topic 3)

You are troubleshooting an issue and you need to connect to presentation codec via CLI. Which CLI command allows you to connect to the presentation codec?

  1. utils connect presentation

  2. utils system presentation

  3. utils presentation connect

  4. utils presentation system

  5. set system presentation

Answer: B

Question No: 68 – (Topic 3)

A Cisco TelePresence VCS displays this alarm: quot;Root password is set to default.quot; How can this security warning be addressed?

  1. Use the Cisco TelePresence VCS web user interface, choose Administration gt; User Settings, and change the root password.

  2. Use SSH to log in to the Cisco TelePresence VCS as Administrator and issue the command xconfig root set passwd.

  3. Use SSH to log in to the Cisco TelePresence VCS as Root, issue the command set password, and enter the new password when prompted.

  4. Use SSH to log in to the Cisco TelePresence VCS as Root, issue the command passwd, and enter the new password when prompted.

  5. Use the Cisco TelePresence VCS web user interface, choose Administration gt; System Settings, and change the root password.

Answer: D

Question No: 69 – (Topic 3)

Refer to the exhibit.

Ensurepass 2018 PDF and VCE

Users in a Cisco TelePresence room report audio and video quality issues. You have been asked to troubleshoot the issue. You log in to the endpoint GUI and check telephony settings. Which option would you recommend to resolve the issue?

  1. Audio/video quality issues are generally due to low bandwidth. Contact your carrier to increase the bandwidth.

  2. quot;DSCP For TelePresencequot; is not correct. Configure the correct value via codec GUI.

  3. quot;DSCP For Audioquot; is not correct. Configure the correct value via codec GUI.

  4. DSCP values are correct. Check the QoS configuration on the router.

  5. The quot;DSCP For TelePresencequot; and quot;DSCP For Audioquot; values are not correct. Configure the correct value in codec GUI.

  6. The quot;DSCP For TelePresencequot; and quot;DSCP For Audioquot; values are not correct. Configure the correct value in the Cisco Unified Communications Manager service parameter.

Answer: F

Question No: 70 – (Topic 3)

Which two of these are required in order to complete the password recovery of a Cisco TelePresence System endpoint? (Choose two.)

  1. must have FTP enabled on the endpoint

  2. must have SSH enabled on the endpoint

  3. must have the security question answer for the endpoint

  4. must be in the same room as the main display

  5. must have SFTP enabled on the endpoint

  6. must call Cisco TAC for the security code

Answer: B,D

100% Ensurepass Free Download!
Download Free Demo:210-065 Demo PDF
100% Ensurepass Free Guaranteed!
Download 2018 EnsurePass 210-065 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *